食品包裝袋定制如何正確選擇？

來源：http://m.58gaofang.com/ 日期：2024-02-21

標準一：食品級原材料

Standard 1: Food grade raw materials

塑料包裝袋必須要達到食品級，因為直接與食品接觸，如果原材料不過關，用了回收料或者工業級的材料，雖然在外觀上看不出區別，但是對食品會產生很大的影響，甚對人體造成一定的危害。

Plastic packaging bags must reach food grade because if they come into direct contact with food, if raw materials are not up to standard and recycled or industrial grade materials are used, although there may not be a noticeable difference in appearance, it can have a significant impact on food safety and even pose a certain risk to human health.

標準二：耐寒性

Standard 2: Cold resistance

冷凍食品通常在零下的環境中存儲，很多情況下需要急速降溫，在這個情況下，包裝材料的力學強度會隨之下降，使袋子很容易碎。因此，耐寒性是冷凍食品包裝袋定制時特別需要特別注意的。

Frozen food is usually stored in a sub zero environment, and in many cases, rapid cooling is required. In this case, the mechanical strength of packaging materials will decrease, making the bags easy to break. Therefore, cold resistance is particularly important when customizing frozen food packaging bags.

標準三：耐沖擊性

Standard 3: Impact resistance

為防止在運輸、裝卸的過程中受到外力的破壞，對袋子的耐沖擊性也有較高的要求。

To prevent damage from external forces during transportation and loading and unloading, there are also high requirements for the impact resistance of bags.

標準四：熱封強度

Standard 4: Heat sealing strength

袋子的熱封強度不夠或者熱封溫度過高，都會導致封口不好。

Insufficient heat sealing strength or high heat sealing temperature of the bag can lead to poor sealing.

標準五：拉斷力、層間剝離強度

Standard 5: Breaking force and interlayer peel strength

包裝袋的力學性能如果比較差，很容易導致分層、無法達到應有的承重作用。

If the mechanical properties of packaging bags are relatively poor, it is easy to cause layering and fail to achieve the expected load-bearing effect.

標準六：耐穿刺性

Standard 6: puncture resistance

冷凍后的食品一般比較堅硬，運輸及堆放過程中很容易將包裝袋穿破，因此冷袋子的耐穿刺性要求很高。

Frozen food is generally relatively hard, and it is easy to break through the packaging bags during transportation and stacking, so the puncture resistance of cold bags is required to be high.

標準七：抗壓性

Standard 7: Compression resistance

這一點主要針對在運輸和搬運過程中的跌落或者沖擊等對產品的損害。

This mainly focuses on the damage to the product caused by falls or impacts during transportation and handling.

本文由濟南塑料袋訂做友情奉獻.更多有關的知識請點擊:http://m.58gaofang.com真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待

This article is customized by Jinan plastic bags for friendship and dedication. For more information, please click: http://m.58gaofang.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned